As part of the briquetting process, coolant is released as the
swarf is compressed.This coolant can be reclaimed and reconditioned
with a coolant Cleaning Station, which integrates with a
briquetting system.
You can reclaim and recondition all of this coolant, making it fit
for re-use. our machine will removes particles and trampoil, and
controls bacterial growth.
Swarf Briquetting and coolant cleaning combine to produce some
fantastic savings and very fast payback, as can be seen in the case
studies below:
How does it work?
The Scrap Metal Cake Blocks Compressing Machine decentralized
processing of scrap, small equipment placed in the workshop or next
to the lathe. The scrap can be poured into the machine hopper
directly while the machine keeps working. Coolant will be squeezed
out and collected at the bottom collection box.
the Coolant Cleaning System is professional press the waste metal power to be the block,
Pressing copper cake about 120-150 kg / hour, pressed aluminum cake
about 100- 120 kg / hour.
The machine is equipped with a screen to control the feeding speed
of the machine,
And power consumption of 1.5 degrees / hour. One minute can be
pressed 2 cakes.
1, Applicable material: Aluminum/stainless steel plate/iron/copper
2, Compressed size: ∅70,10-50MM
3, Maximum pressure: 42 Tons
4, Hopper inlet size: 520*450MM
5, Hopper inlet height: 780MM
Our machine could ensure accurate mixing of the metalworking
fluids; tight, accurate and repeatable emulsions giving the fluid
the best possible start.
By reclaiming used metalworking fluid from a swarfbriquetting
process, the Coolant Cleaning System has allowed Senior to reclaim
over 20,000 litres of coolant per month.
- The price of scrap sold after pressed into cakes can be increased
by about 15%~30%,
- the briquette machine workshop warehouse is more clean and
beautiful after using the machine.
- Clean and beautiful, enhance the company's clean image, while
contributing to environmental protection.
